THE VARIATION OF ADHESIVE QUANTITY ON PARTICLE BOARDS FROM ARECA NUT SHELL AND MAHANG WOOD POWDER

Indriyani Puluhulawa

Abstract


Particle boards are the solution to the productivity problems of the timber industry which deficiency of raw materials. The manufacture of particle boards from Areca nut shell and Mahang wood powder is an effort to develop existing types of particle boards as well as efforts to utilize areca nut waste and increase the economic value of local wood (Mahang wood). The aim of this study was to determine the effect of quantity variations of adhesive to the composition of the mixture. There are four types of particle board variations are made with the same composition of areca nut and powder but different quantity of adhesive. The determination of physical properties and mechanical properties of particle boards based on JIS A 5908 2003 or SNI 03-2105-2006. The result was an increase in physical and mechanical properties on the particle board whose content of adhesive was greater. The other sides, the mechanical properties of all variations of particle board do not fulfill the existing standards.
Keywords: Areca nut particle board, Mahang wood powder particle board, adhesive content


Full Text:

PDF

References


Ariyani MS. 2009. Kualitas papan partikel sabut kelapa (Cocos Nucifera, L). Repository IPB. Bogor

Badan Standarisasi Indonesia (2006), Papan Partikel.SNI 03-2105-2006. BSN. Jakarta, Indonesia.

Fuady (2009) Sifat Fisis dan Mekanis Papan PartikelTandan Sawit dan Kayu Karet, MR Yurizan (2015) Politeknik Sriwijaya.

Haygen dan Bowyer. (1989), Kerapatan Papan Partikel, http://papanpartikelku.blogspot.co.id/2016/04/sifat-fisis-papan-partikel.html, diakses pada tanggal 30 Desember 2017 pukul 09.30 WIB.

Iswanto. (2005), Pengembangan Tebal Papan Partikel, http://juliusthh07.blogspot.com/2010/04/pengembangan-tebal-dan-daya-serap-air.html#ixzz52iyCgnxU, diakses pada tanggal 30 Desember 2017 pukul 10.00 WIB.

Japanese Standart Association. (2003) Japanese Industrial Standard Particle Board JIS A 5908. Tokyo.

Puluhulawa I, dkk. (2018). Pengaruh penambahan baut dan paku terhadap kuat lentur balok laminasi kayu Mahang dan Meranti. Jurnal teknik sipil dan arsitektur (INERSIA). Vol. XIV No.1, 61-74.

Putra Erwinsyah. (2011). Kualitas papan partikel batang bawah, batang atas dan cabang kayu Jabon. Departemen hasil hutan Fakultas Kehutanan Institut Pertanian Bogor.

Widarmana. (1977), Kadar Air Papan Partikel, http://papanpartikelku.blogspot.co.id/2016/04/sifat-fisis-papan-partikel.html, diakses pada tanggal 30 Desember 2017 pukul 09.30 WIB.

Subiyanto. (2003), Daya Serap Air Papan Partikel, http://juliusthh07.blogspot.com/2010/04/pengembangan-tebal-dan-daya-serap-air.html#ixzz52iyCgnxU, diakses pada tanggal 30 Desember 2017 pukul 10.00 WIB.

Sulastiningsih.(2009), Pengaruh Kadar Perekat Terhadap Sifat Papan Partikel Bambu. Bogor. Jurnal PusatPenelitian dan Pengembangan Hasil Hutan.

Sumardi I, (2004). Pengaruh kerapatan dan ukuran partikel terhadap sifat fisis dan mekanis papan partikel kayu suren (Toana Sureni Merr). Proceeding Mapeki VII, Makasar.

Wahyuningsih (2011) Pengaruh Perendaman dan Geometri Partikel Terhadap Kualitas Papan Partikel Sekam Padi. Skripsi. Fakultas Kehutanan. Institut Pertanian Negeri Bogor.




DOI: http://dx.doi.org/10.33603/jgst.v2i3.2145

Refbacks

  • There are currently no refbacks.